Abbreviation：EASC Formula：Cl3(C2H5)3Al2 Molar Mass：247.51 g/mol CAS-Reg.-No.：12075-68-2 EINECS-No.：235-137-7
|Molar Mass：||247.51 g/mol|
|Hydrolysis gas composition|
|Ethane *||min. 99.3 % m/m|
|n-butane*||max. 0.5 % m/m|
|isobutane*||max. 0.1 % m/m|
|hydrogen*||max. 0.1 % m/m|
|aluminum**||min. 21.4 % wt|
|ethane*||min. 99.8 % m/m|
|n-butane*||max. 0.1 % m/m|
|isobutane*||max. 0.05 % m/m|
|hydrogen*||max. 0.05 % m/m|
|aluminum**||min. 21.6 % wt|
|*Calculation of the hydrocarbon gas chromatographic calculation.|
**Titration of aluminium and chlorine by hydrolysis products.
|Technical Data：（Values determined on representative samples or taken from literature）|
|state||clear colourless liquid at 20°C|
|boiling point||14mmHg， 90℃|
|density||25℃， 1.092 g/cm3|
|viscosity||25℃， 1.9 mPa.s|
|stability：At above 150 ℃, especially during 170-180 ℃, have apparent decomposition phenomenon can be observed. After contact with air combustion; Contact with water can be violent reaction, may burn.|
|Supply form：Can provide pure products, can also according to customer's requirements, provide any concentration of hydrocarbon liquid.|
|Industrial applications： catalysts for the production of polyolefin and synthetic rubber. Intermediates for the production of organic compounds.|
|Packaging： the use of capacity of 1-6000 kg for the safe transport of special containers. All containers conform to the prevailing traffic regulations.|
Tags：according to the current EU and Chinese regulations classification and labeling. For further details, please refer to our security data sheet.
Treatment:：detailed in our brochure in processing. In general, when dealing with this product, it is necessary to comply with local laws and regulations.
The information contained in the above is to provide advice, and to give us the best knowledge. It can not be considered our obligation to use when it involves a variety of possible working methods and applications and any third party patent right, we do not assume any responsibility.