Home > Product > Company product > Chlorodiethyl-Aluminum


    Abbreviation:DEAC Formula:Cl(C2H5)2Al Molar Mass:120.56 g/mol CAS-Reg.-No.:96-10-6 EINECS-No.:202-477-2

    1. Detailed information
    Molar Mass:120.56 g/mol
    Hydrolysis gas composition
    Ethane *  min.   99.3   % m/m
    n-butanemax.   0.5    % m/m 
    isobutane* max.   0.1    % m/m
    hydrogen*max.   0.1    % m/m

    aluminum** min.   22.0   % wt
    Cl/Al1.00-1.03     m/m
    Typical value:
    ethane*   min.   99.8   % m/m 
    n-Butane* max.   0.1    % m/m      
    isobutane*max.   0.05   % m/m
    hydrogen*max.   0.05   % m/m

    aluminum**min.   22.2   % wt
    Cl/Al1.01          m/m

    *Calculation of the hydrocarbon gas chromatographic calculation.

    **Titration of aluminium and chlorine by hydrolysis products.

    Technical Data:(Values determined on representative samples or taken from literature)
    Stateclear colourless liquid at 20°C
    boiling point3mmHg,60℃
    9mmHg,    80℃
    24mmHg,    100℃
    47mmHg,    120℃
    50mmHg,    127℃
    78mmHg,    140℃
    760mmHg,   208℃ 
    freezing point-78℃
    density25℃ ,     0.962 g/cm3
    viscosity25℃ ,     1.3 mPa.s 
    30℃ ,     1.4 mPa.s
    specific heat57℃ ,     1.715 J/g-K
    Vaporization heat1bar ,     172 kJ/kg
    Hydrolytic heat25℃ ,     3703 kJ/kg
    Combustion heat25℃ ,     -3577 kJ/m
    stability:At above 150 ℃, especially during 170-180 ℃, have apparent decomposition phenomenon can be observed. After contact with air combustion; Contact with water can be violent reaction, may burn.
    Supply formcan provide pure products, can also according to customer's requirements, provide any concentration of hydrocarbon liquid.
    Industrial applicationscatalysts for the production of polyolefin and synthetic rubber. Intermediates for the production of organic compounds.
    Packaging the use of capacity of 1-6000 kg for the safe transport of special containers. All containers conform to the prevailing traffic regulations.
    Tagsaccording to the current EU and Chinese regulations classification and labeling. For further details, please refer to our security data sheet.
    Treatment detailed in our brochure in processing. In general, when dealing with this product, it is necessary to comply with local laws and regulations.
    The information contained in the above is to provide advice, and to give us the best knowledge. It can not be considered our obligation to use when it involves a variety of possible working methods and applications and any third party patent right, we do not assume any responsibility.
    Copyright © friend-chem.com 2015 All Rights Reserved . 浙江福瑞德化工有限公司 保留所有权 Powered By Goomay